Lighted Nocks: What Every Bowhunter Needs to Know

EP 73: Lighted Nocks: What Every Bowhunter Needs to Know
The Archery Project Podcast
Episode 73  ·  17 min read

Everybody argues about the strongest front-end components and the most durable arrow shaft. Almost nobody talks about the nock, and Zakk thinks it may be the most critical component on the arrow. This episode is about lighted nocks: how they activate, how they fit, how much weight they add, why they break more often than stock nocks, and what to check before you take them hunting. Zakk isn’t for them or against them. His shop sells them. He just wants you to test, retune, and confirm before you trust one on an animal.

Listen to the full episode on Apple Podcasts, Spotify, YouTube or stream below.

We discuss:

Timestamps refer to the audio/video episode above.

  • Why the nock is the most overlooked component on an arrow, and why Zakk is neutral on lighted nocks
  • Why lighted nocks have taken off: night shoots, shot placement, and arrow recovery
  • How lighted nocks activate, battery life, and the problem of a glowing quiver in the stand
  • Micro vs. FIT-style lighted nocks, and which shaft sizes need a bushing
  • Why nock fit drives tuning and arrow flight
  • Nock-to-string fit, Amazon nocks, and nock pinch
  • Nock-to-shaft fit, and how a bad nock can simulate a dry fire
  • Retuning after the swap: paper first, then broadheads
  • From 7–8 grains to 23–24 grains: what the extra weight does to your sight tape
  • Diameter and durability, and the risk for long-draw and high-poundage shooters
  • How often to inspect lighted nocks, and what to look for
  • Practicing with them, accidental activation, and side-by-side testing
  • State regulations, and why a lighted nock shouldn’t stretch your ethical range
  • Pass-throughs where the nock pulls off, and a shop story
  • Longer nocks, arrow length, and why Extreme Outfitters measures carbon to carbon
  • Replace them every season, and Zakk’s bottom line

00:00The Most Overlooked Component on Your Arrow

Everybody wants to argue about components, Zakk says. What are the strongest front-end components? What’s the most durable arrow shaft? Meanwhile one of the most overlooked and neglected parts of an arrow is the nock. This episode covers lighted nocks in particular: the pros and cons, what to look for, and Zakk’s experience with them as an archery shop owner.

Zakk owns Extreme Outfitters, a large pro shop in Jacksonville, North Carolina that serves archers across the country. He opens with a disclaimer that holds for the whole episode: he is not for or against lighted nocks. Like everything in archery, they come with benefits and risks, and you have to weigh them.

That weighing applies to every component, every arrow build, and every accessory on your bow. Look at your application. What are you doing, and does this help in the scenarios you’ll actually be in? There are a lot of lighted nock options out there, and some people hold very strong opinions about which ones to use and which to avoid.

Zakk has seen lighted nocks gain a lot of popularity in recent years, and he thinks it’s for good reason. Some archery events now run night shoots, and seeing lighted nocks fly through the air is fun.

The hunting case is stronger:

  • Shot placement. A lighted nock gives you a visual indicator of where you may have hit the animal.
  • Arrow recovery. If you get a full pass-through and the lighted nock stays intact on the arrow, it’s much easier to find that arrow and start tracking.

Those are good reasons to run them. But Zakk says you have to be careful about which lighted nocks you run, and you have to inspect them to make sure they aren’t degrading, deteriorating, or developing other issues.

02:40How Lighted Nocks Activate

Zakk has touched on lighted nocks before. He’s talked with plenty of people about them, from the crew in his shop to Dan Staton, and everyone has different opinions and experiences. The first thing he wants you to consider is activation, meaning how the nock actually turns on.

There are a couple of common designs:

  • A button inside the throat of the nock. When you release the arrow, the string contacts the button and turns the nock on.
  • A nock that moves forward. On release, the whole nock shifts forward, completes the circuit, and lights up.

They’re different ways of doing the same thing: completing a circuit to turn the light on. Battery life on many of them is long, 20 to 40 hours depending on the option you choose. On some you can change the battery. Others are inexpensive enough that it makes more sense to throw them away and buy new ones.

The Glowing Quiver Problem

Activation matters because of what happens in the field. Whether you’re in a stand or on a stalk, the last thing you want is to accidentally turn on a lighted nock. In low light, a quiver full of glowing arrows could give you away, and then you’re fidgeting with the nock trying to turn it off. When you buy lighted nocks, look at how they activate so you don’t set them off by accident.

05:12Micro vs. FIT: Sizing and Bushings

The next big thing is fit and size. Zakk says most lighted nocks come in two styles: a micro-diameter lighted nock and a FIT-style nock.

  • Micro lighted nocks are designed for small-diameter arrow shafts, the .166 micro-diameter size.
  • FIT-style lighted nocks cover the other diameters. On most sizes, a bushing goes into the rear of the arrow, and the lighted nock plugs into the bushing.

The exception is the .204, the 5mm diameter. Here the FIT nock plugs directly into the rear of the shaft with no bushing, and Zakk likes that because you don’t have to put anything extra in the shaft. Standard diameters like .233, .244 and .246 need a bushing in the rear of the shaft for the lighted nock to fit correctly.

Whichever size you run, the nock has to fit the shaft correctly. If you’ve ever seen a nock that’s a little too loose, with a little too much play, you know it can cause problems.

06:30Why Nock Fit Is So Critical

Zakk thinks nock fitment is critical to how your bow performs. We focus heavily on the front of the arrow, he says: inserts, outserts, HIT inserts, collars, and the shaft itself. The nock gets neglected. It’s the least talked-about component on an arrow that he sees, and he understands why.

“It’s not exciting. It’s literally a little plastic piece on the rear of the shaft that attaches your arrow to the string, but it is probably the most critical component on an arrow.” — Zakk Plocica

Without good nock fit, both to the string and to the shaft, you can create a whole list of problems:

  • Tuning issues. A bow can become a nightmare to tune with an arrow that doesn’t seat on the string correctly.
  • Erratic arrow flight. If nock fit on the string isn’t consistent, arrow flight won’t be either.

The nock isn’t sexy, Zakk says, but you need to inspect it and ask yourself honestly whether switching from your stock nock to a lighted nock makes sense for what you’re doing. Only you can answer that.

07:55Nock-to-String Fit

When you clip an arrow onto the string, it shouldn’t be so tight that you’re fighting to get it on and off. Zakk has seen arrows where the nock was so tight on the string that, on the shot, the nock stayed on the string and pulled out of the rear of the shaft. You lose that weight from the back of the arrow, you get erratic flight, and the arrow doesn’t perform the way it needs to. It’s a big problem.

So check nock-to-string fit any time you buy aftermarket lighted nocks. That includes the rise of Amazon lighted nocks. Zakk says they work and a lot of people love them. He’d just look closely at manufacturing consistency, especially weight and fit to the string. Arrows need a consistent fit on the string to perform the way they should.

Watch for Nock Pinch

Some lighted nocks are thicker than the stock nock that came on your arrow. If you tuned your bow with the stock nock and then switch, check whether you need to retie your nock set. Otherwise you can get nock pinch at full draw, where the arrow starts to stand up as you draw.

Even if you buy a pack, Zakk says to pretest the fit of every nock in it. That’s how you catch problems in the mold of the lighted nocks you bought.

09:48Nock-to-Shaft Fit and the Dry-Fire Risk

The other half of fit is how the nock sits in the rear of the shaft. A nock that’s too loose and falls out easily is a big problem. Depending on the manufacturer, Zakk sees inconsistent fit even in aftermarket nocks that aren’t lighted, if they aren’t quality nocks. Make sure each nock fits correctly, doesn’t spin, and doesn’t come out too easily.

The stakes are high. Shooting a bow without an arrow is a dry fire, and it can blow up, damage, or ruin the bow. A bad nock can create the same situation. If the nock doesn’t fit the string, or has fallen out of the shaft, and it isn’t fully seated when you draw and release, you can simulate a dry fire.

“You took and you bought a $35 pack of nocks and then you just cost yourself a couple hundred bucks because it threw the string, it derailed it, it damaged the cam or potentially damaged the limb.” — Zakk Plocica

Zakk has seen it happen: someone swaps a component, doesn’t check everything, has a failure, and damages the bow. Any time you change components on an arrow, check fitment, test, and confirm that everything works before you shoot. It will save you a lot of money in the long run.

12:31Retune After the Swap: Paper First, Then Broadheads

Any time you change arrow components, Zakk says, you have to test and confirm. It’s not enough to assume a change should work because it’s virtually identical, with the same weight and the same profile. If you’ve shot a factory nock all season or all off-season and you’re putting lighted nocks in for hunting season, confirm the tune of the bow by putting it back through paper.

Don’t assume the bow will perform the same with a different nock. Fitment changes. The thickness of the nock can change, and you can get nock pinch. Whether you do your own work or rely on a local shop, the starting point is shooting through paper to see if anything needs to change.

If you get a bad tear after changing nocks, you’ll need to retune, and you should retune with the equipment you’re actually going to hunt with. Make those changes before the season.

“Field points you can get away with a lot. But as soon as you start putting broadheads on the front of that arrow, the potential for inconsistencies or imperfections are much greater. They’re amplified.” — Zakk Plocica

Any deviation in your tune will show up downrange, especially as you shoot longer distances.

The Order of Operations

  • Paper tune the bow and confirm it’s shooting cleanly through paper.
  • Shoot a broadhead with the lighted nock and confirm broadhead flight is good.
  • Confirm the nocks actually activate. You may get a pack with some duds that never turn on. Then you’ve done all this work and gained nothing.
  • Make any broadhead tuning changes the new setup calls for.

Zakk’s broader takeaway: whenever you change anything on an arrow, whether that’s point weight, nocks, or vanes, go back through paper to confirm. It’s peace of mind and a confidence builder, because you know your equipment is doing what it should.

He has seen customers buy a pack of lighted nocks, put them on, and go straight to the field. He doesn’t think that’s a good move.

15:23The Weight Problem: 7–8 Grains to 23–24 Grains

Weigh a stock or factory nock and Zakk says you’ll typically see right around 7 or 8 grains on the rear of the shaft. A lighted nock, depending on whether you need a bushing and on its profile and size, can come in at 23 or 24 grains. Call it roughly 16 to 18 grains added to the back of the arrow. That’s another variable, and it can affect how the arrow tunes.

For the Whitetail Hunter

If you’re a whitetail hunter whose max shots are 25 to 35 yards, Zakk doesn’t think you’ll see a big difference from that extra rear weight. Your sight tape probably won’t change in any way you could notice.

For the Western Hunter

It’s different if you go west on a spot-and-stalk hunt, say for mule deer or antelope, after confirming lighted nocks are legal in that state. If you add that weight and don’t recheck your sight tape, you could be off by a couple of yards. You range the animal, dial your sight, and the tape is wrong. That can be a miss, all because you didn’t retest.

Any time you add a component to an arrow, and especially any time the weight changes, reconfirm everything. The effect on your sight tape grows with distance.

“Just because other guys are shooting lighted nocks doesn’t necessarily mean you need to shoot them.” — Zakk Plocica

If they do make sense for you, because they give you more confidence or improve your capability or recovery, Zakk says it’s worth getting good lighted nocks and investing the time to set them up properly. Confirm two things before you hunt: that they activate correctly, and that you’ve caught and fixed whatever the added weight changed. The last thing you want is to finally get the opportunity, take the shot, and miss because your sight tape was off by a couple of yards and your equipment wasn’t up to par.

18:42Diameter and Durability

Lighted nocks come in everything from 4mm up to standard diameters. Zakk says his shop has seen fewer durability problems with 5mm and standard-diameter lighted nocks. There’s a little more material, and they seem more durable.

Why Lighted Nocks Are Weaker

Why do lighted nocks have a durability problem that stock nocks mostly don’t? A lighted nock has to hold electronics, a battery, and activation switches. Fitting all of that inside means removing material. The housing gets thinner, more brittle, and less durable.

Long Draws and High Poundage

That becomes a major issue for shooters with very long draw lengths. A long power stroke means the arrow travels farther with a lot of force on it. High-poundage shooters face the same thing: more energy and more stress on the arrow when the string comes forward. That’s where lighted nocks start to fail, and Zakk says the biggest problems are with micro-diameter lighted nocks.

With 80- and 90-pound bows now common, he says you might get away with lighted nocks a couple of times, but the potential for failure is much greater. If you shoot high poundage or a long draw, think hard about whether they’re worth it. If they are, test them until you’re comfortable with their durability and performance. And inspect every nock you buy for consistency in the mold and the fit. Don’t buy a pile, throw them in, and assume they’re good.

Zakk’s Pick: 5mm, No Bushing

The shop hasn’t seen many durability issues with 5mm or standard-diameter lighted nocks. Zakk likes the 5mm because it plugs straight into the rear of the shaft without a bushing, which removes one failure point. Bushings have been pretty reliable, he says, but they add weight to the rear of the shaft. Weigh all of it against your own draw length and draw weight before deciding to switch.

21:33Inspect Them More Than Anything Else on Your Arrow

“I think lighted nocks need to be inspected way more often than any other component you’re going to have on your arrow. Every time you shoot that arrow with the lighted nock, you need to inspect it.” — Zakk Plocica

Less material means more chances for something to fail. Every time you shoot one, check:

  • Cracks or any damage at all.
  • Seating on the string. You should get that audible click every time you put it on the string.
  • Stretch. Make sure the fit hasn’t loosened.
  • Throat wear. Depending on the design, look for wear that makes the fit inconsistent.
  • Bushings, if you’re using them to seat the nock in the rear of the shaft.

Group Shooters, Look Closer

If you shoot groups, it’s easy to nick a nock, even a standard one. The damage can be very small and hard to see, with tiny cracks you might miss. On a less durable lighted nock, Zakk says those micro cracks can become catastrophic the more you shoot it. Be thorough.

23:32Practice With Them Before You Hunt

If you’re switching to lighted nocks, Zakk says you have to practice with them. Buy a handful, shoot them, and make sure you’re not seeing failures after a few reps. Then make sure they meet your standard. Are you getting accidental activations? Do you need to remember not to snap one onto the string too hard? Do you need to carry a tool to turn them on or off if one activates?

He also likes to run his own test: shoot the lighted nock beside his stock nock and see if there’s a performance difference. While you practice, confirm your sight tape, especially if you’ll be shooting at distance. Adding weight to an arrow can change its trajectory.

24:43Legality and False Confidence

Zakk thinks lighted nocks are legal in most states, but you need to confirm for the state you’re hunting. He compares it to electronic sights and sight lights, which some states don’t allow. Do your due diligence. The last thing you want is to arrive and learn you can’t use them, or to use them and end up in trouble for using something illegal on a hunt. Check your state regulations.

Don’t Let the Light Stretch Your Range

The other risk is false confidence. Zakk knows it sounds odd, but because you can see the arrow’s flight and impact better, you might start thinking you can shoot farther. Practice with them, know the ethical range you’re comfortable shooting, and don’t overextend just because there’s a light on the back of the arrow.

He’s clear the benefits are real: seeing shot impact on the animal, and finding the arrow in the field so you have a good starting point for blood trailing. That matters most for people shooting at longer distances, where the arrow might be 60 or 80 yards away instead of 20. Finding it right away lets you start tracking sooner.

26:27When the Nock Pulls Off on a Pass-Through

There’s a failure mode that cancels out the main benefit. Zakk has seen hunters get a pass-through with a lighted nock, only for the nock to pull off as the arrow passes through the animal. Now there’s no lighted nock. You gained nothing except a problem and a lost nock you paid for.

He remembers a customer from a year or two ago who used a knock-off lighted nock. Zakk doesn’t remember the brand. There are a lot of options out there, some of them very good, and his shop sells them. The hunter found the animal and everything turned out fine. But on the shot, the nock either didn’t have good fitment or broke on impact. He never found it, so it didn’t make finding his arrow any easier.

27:40Longer Nocks and Arrow Length

Lighted nocks are typically a little longer than standard nocks, so the nock sits farther out and your arrow measurements can change. That’s why, when Extreme Outfitters asks for your arrow measurements, the shop measures carbon to carbon, excluding all components. A lot of customers run lighted nocks, and measuring to the nock throat can change the overall length. Some lighted nocks will make an arrow seem a bit longer simply because the nock is longer.

If you’re still getting comfortable with arrow length, spine, diameter, GPI, finished weight, and the other pieces that make up an arrow setup, start with our Arrows for Beginners guide.

Test It Yourself, Even With Zero Weight Change

If you use the Amazon ones, Zakk says that’s fine. He’s heard a lot of good things about them and isn’t knocking them. Just do your own testing so you know they work with your arrow and your setup, whether you’re hunting or shooting a fun 3D course.

Any change to an arrow or bow is worth reconfirming the tune. Even if a lighted nock weighed exactly the same as your stock nock, the fit could differ slightly, and so could its size and how it indexes on the string. Put the bow back through paper for peace of mind and confidence. That’s what Zakk would do, and what he encourages you to do.

What the Shop Has Seen, and When to Replace Them

Zakk has had thousands and thousands of people come through his shop.

“We have seen less failures with stock nocks than we have with lighted nocks, but we have seen a lot of success as well.” — Zakk Plocica

Anything can fail, he says, but a lighted nock is much more likely to. So be diligent and in tune with your equipment, and keep testing, confirming, and checking that everything works.

He also wouldn’t stretch the life of a lighted nock. In his opinion you won’t get a ton of shots out of them, and it isn’t a good idea to try. Shoot them, use them for the season, and replace them every season for peace of mind. The last thing you want is a durability problem that costs you a hunt or damages your bow. “It’s got bad written all over it.”

30:10Not For, Not Against: Zakk’s Checklist

Zakk is neutral on lighted nocks. He thinks they’re cool, his shop has seen a lot of good from them, and plenty of people have confidence in them. If you’re switching from stock nocks or trying lighted nocks for the first time:

  • Buy nocks you’re confident in.
  • Confirm the tune of the bow.
  • Confirm nock-to-string fit and nock-to-shaft fit.
  • Be cautious with any aftermarket component. Test reliability and durability yourself until you’re comfortable.
  • Confirm your sight tape, especially if you hunt out West at longer distances, so a range error doesn’t cost you a shot.

Once everything checks out, take them to the woods and get the job done. In the shop’s experience, Zakk says, most people don’t need to change much when they switch. Depending on the nock, though, they sometimes do have to retune the bow.

“I think they can be very great and they can really add to what you’re doing to make you more capable and improve your recovery, but they could also be detrimental if you’re not diligent with taking care of them and inspecting them.” — Zakk Plocica

If you have questions about what proper fit should look like, or anything else on lighted nocks, arrow components, or arrows, Extreme Outfitters has techs available six days a week. If you don’t have a local shop, reach out to the crew directly. Zakk also wants to hear from you: what’s your go-to lighted nock brand, and did you have to change your sight tape or tune when you switched? Drop it in the comments.

Stock vs. Lighted Nocks, Side by Side

Option What It Fits Bushing? Durability (per the shop)
Stock / factory nock Comes with the arrow No Fewer failures than lighted nocks; ~7–8 grains
Micro lighted nock Micro-diameter (.166) shafts Not discussed Biggest durability issues, especially with long draws and high poundage
FIT lighted nock, 5mm .204 (5mm) shafts No, plugs directly into the shaft Few issues; Zakk’s preference (one less failure point)
FIT lighted nock, standard .233, .244, .246 shafts Yes Few issues; bushings reliable but add weight

Depending on the nock, its profile, and whether it needs a bushing, Zakk says a lighted setup can weigh 23–24 grains, compared with 7–8 grains for a stock nock.

The Bottom Line

Lighted nocks can help with shot placement and arrow recovery, but they aren’t a plug-and-play swap. They’re heavier, often longer, sometimes thicker, and less durable than the nock that came on your arrow, and micro-diameter nocks on long-draw or high-poundage bows are the most likely to fail. Check fit on the string and in the shaft, retune through paper, confirm broadhead flight and your sight tape, inspect them after every shot, confirm they’re legal where you hunt, and replace them every season.

Gear & Products Mentioned

Shop This Episode

Get any of these at extremeoutfitters.com — use code ARCHERYPROJECT to save.

Links

Enjoyed this episode? Leave a review — it’s the single biggest thing that helps new listeners find the show.

Rate on Apple Podcasts

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *