EP 57: I Developed Target Panic — Total Archery Challenge Seven Springs Recap
Zakk has never had a mental problem shooting a bow. Not once. Then, halfway through the Prime course at Total Archery Challenge Seven Springs — shooting alongside Dan Staton and Cody Griffin, with cameras rolling — his shot stopped breaking. He hit the click and stalled. He blew up five arrows, borrowed two of Cody’s to finish, and came home with a list of changes to make. This is the full after-action report: what target panic actually felt like, what the best shooters at the event told him to do about it, and why he thinks the whole thing was good for him.
Jump to
Listen to the full episode on Apple Podcasts, Spotify, YouTube or stream below.
We discuss:
Timestamps refer to the audio/video episode above.
- Why Seven Springs is the best Total Archery Challenge event on the calendar
- Shooting the Prime course with Dan Staton and Cody Griffin — 25 targets, four and a half hours
- What target panic actually felt like, midway through the course
- Hitting the click and not being able to expand through the shot
- Why a 35-inch ATA bow felt long uphill — and the move from 85% to 80% let-off
- George Ryals on setting your front shoulder and drawing straight back
- Five arrows blown up on one course, and borrowing two of Cody’s to finish
- “Shoot paper” — the 20-yard three-spot, and building a target bow
- The RMEF course in the timber, and what shadows teach you about peep and aperture size
- Meeting a woman shooting 111 yards with a 40-pound bow
- Going straight to the manufacturers in vendor village
- How to pick your courses — and why he’s carrying eight arrows now
00:29Why Seven Springs Is the One to Shoot
Of every Total Archery Challenge event Extreme Outfitters attends, Seven Springs, Pennsylvania is Zakk’s favorite — and it isn’t close. It’s the biggest, it draws the most people, and the venue itself does a lot of the work. This year the weather cooperated completely: no rain, clear skies, sunshine, and temperatures he described as absolutely fantastic. The vendor village was massive. The crowd was massive.
It was also, by his own account, the most challenging TAC he has personally shot. Those two facts are the whole episode.
01:04The Prime Course, 6:30 A.M., With Dan Staton and Cody Griffin
Zakk linked up with Cody Griffin from Easton and Dan Staton of ElkShape for Friday morning. He, Cody, and Joey — his camera guy — picked Dan up from the airport, and Zakk’s read on him was immediate: great guy, very similar personality, very similar interests. Somebody he genuinely enjoyed being around.
The group met at 6:00 and was on the course by 6:30, first ones on it. Cody, who had it in his head that they were meeting at 6:20, caught up with them around the second target. Zakk’s assessment, from knowing him a long time: “Cody is on Cody’s time.”
The Prime course is 25 targets — a mix of long shots, technical shots, and tight shots, a lot of uphill, a lot of downhill, a lot of it in the timber. Zakk had shot it in Tennessee and in Pennsylvania a couple of years earlier and chose it again deliberately. With nobody in front of them, it still took the group roughly four to four and a half hours.
He normally carries five arrows onto a course. In every TAC he has ever shot, he has never lost one. He has missed targets and recovered the arrow. He has never broken one.
04:21Halfway Through, It All Came Apart
The course started fine. A few targets in, nothing wrong, shooting well. Then he mis-ranged one and shot straight over the target’s back — a good shot, just high. He pulled it back together, put the next one on him, no problem.
Then, around the midway point, it stopped being a bad shot and started being a pattern. He could not hold on target. He could not get his shots to break. The biggest offender was uphill, which is hard for everybody — but this was different, and it was new. He has talked to people about target panic for years, always at a distance, always as somebody who had never dealt with it.
“I would get on target, I would hold on target, and I would get to my click on my release. And then that’s where I would stay. I just couldn’t expand through the shot is the best way to put it.” — Zakk Plocica
Once it started, it compounded. Worse and worse and worse, until he was thoroughly frustrated with the whole fiasco. None of it is hidden, either — Dan put a video out on the ElkShape YouTube channel, and an Extreme Outfitters video was expected to land around the same time as this episode. The struggle is on tape.
06:46The Shot That Wouldn’t Break
The mechanical description is worth reading closely, because it’s specific. He’d get into anchor, get into his peep sight, put the pin on target, and reach the click on his release. Then nothing. To make the shot go, he’d start forcing it — and as he tried to force his way through, he’d fall out of his peep sight. The shot would break and the target would be missed.
What he is unusually clear about is that nothing on the bow was at fault.
“There was no issues with the bow. There was no issues with my sight, my third axis, my arrows. I wish I had something to blame, but it was all me.” — Zakk Plocica
One equipment observation did come out of it, though. He’s shooting a newer bow, and it’s the first 35-inch ATA bow he has ever shot. Even with his draw length set where it’s always been, the longer axle-to-axle seems to shift how that draw length feels — and the 35 felt slightly long, specifically shooting uphill. He never felt that with his 33 or his 30.
09:05First Fixes: 85% to 80% Let-Off, D-Loop, and Back to a Hinge
Zakk has shot 85% let-off essentially forever — not by analysis, just where it landed and where it stayed, with no problems. The consensus he keeps running into is that more holding weight, within reason, generally produces a better shot: it keeps you in the shot and doesn’t let you relax at full draw. Target archers live at the low end of let-off for exactly that reason — Zakk points to them shooting 70% to 75%.
So he’s already moved from 85% to 80%. Two things came out of it. He’s not relaxing as much at the wall, and the draw cycle improved — the curve stays straight, no hump, no stacking at the back end. Dropping let-off also shortens draw length slightly, which is precisely what he wanted after the bow felt long uphill. Next he’ll play with D-loop length to put his anchor exactly where he wants it.
The bigger change: he’s going back to a hinge. He owns a TRU Ball HBC Flex, and now that he thinks he’s done with Total Archery Challenge for the year, the plan is a three-finger hinge plus a lot of blank bale work — stripping out aiming entirely so the only thing left to work on is release execution.
He’s also honest about a physical limitation feeding the problem. He has some mobility issues in his shoulders, and if you watch him shoot, he’s quick to come off his face — his hand pulls away and drops as he tries to get into position to push, expand, and pull through the shot. So shoulder mobility work is on the list too, with the goal of the shot breaking cleanly straight back instead of pulling away.
“Things that aren’t really a big deal when you’re shooting 20 to 40 yards on a deer — but whenever you’re shooting 110, 120, 130 yards, any issues within your shot become amplified.” — Zakk Plocica
And they were amplified even on the closer stuff. The 50- to 70-yard uphill shots exposed the same problem.
14:04Set Your Feet First, Then Draw Straight Back
Rather than guess at the cause, Zakk went and asked people who would know. He picked the brain of Cooper French from PSE, a very technical target shooter. He sat down one-on-one with James from Bow Disciples, who spends a lot of time with Paige Pearce. And he talked with George Ryals, who was in the Stan booth right beside theirs.
The read from all of them was consistent: the equipment was part of the problem at most, the mental side was the major problem, and the rest was his shot process.
George and Cooper both gave him the same specific correction, on setting the front shoulder. Zakk’s habit comes straight from bowhunting — you shoot angles, so you draw and then bend at the waist. George’s version reverses the order: set your feet first, get your base set, put the bow where it needs to be, and then draw straight back. He’s planning to get deeper into it with Cooper directly.
The other piece of George’s advice was about how to work on any of it at all.
“Pick one thing, break that one thing down, and do one thing at a time versus overwhelming yourself with so many different things that you’re just not productive in course correction.” — Zakk Plocica, on George Ryals’ advice
What made it especially humbling was that plenty of the shots weren’t even hard. Some were inside 50 yards. He’d hold low, hold under the target, and watch his pin float all over the place.
16:13Five Arrows In, Five Arrows Gone
He walked onto the Prime course with five arrows and left without any of them — lost or blown up, all five, on one course. It was also the first time he’d ever taken a genuinely custom build out. He normally shoots factory-fletched Easton arrows with the Max Stealth vanes they come with: 5.0s, FMJs, Axis 5mm. Simple, run it, keep going.
The build he lost: an Easton 5.0, 300 spine, cut to 27.5 inches, 50 grains up front with a 100-grain head, a wrap on the back, and TAC Driver 2.25 vanes. They looked really good. They’d been flying phenomenally and the bow tuned beautifully with them. It was, again, entirely the shooter.
“They looked really good until I blew them all up. So maybe I’m not ready for the custom arrow build stuff yet. It got expensive quick.” — Zakk Plocica
Ranging was a real factor on that course. Zakk, Cody, and Dan all struggled to get clean ranges on some targets, and all three of them lost an arrow on a single third-scale moose they couldn’t range — they read it around 67 yards when it turned out to be something closer to 47 or 52. Everybody shot over its back.
He ended up borrowing two of Cody’s arrows to finish: a 340 spine, cut down super short, in a four-fletch configuration with only three vanes on it. And with somebody else’s arrows he finished strong. The last target on the course was a 130-yard moose across an open ravine with a hard crosswind, and he made impact on it. Both borrowed arrows came home.
The two builds, side by side
| Friday morning — Prime course | Friday afternoon — RMEF course | |
|---|---|---|
| Shaft | Easton 5.0, 300 spine, cut 27.5″ | Easton, 300 spine, cut down |
| Point setup | 50 gr up front, 100 gr head | 50 gr up front, 100 gr head |
| Fletching | Custom — wrap + TAC Driver 2.25 | Pre-fletched, no wrap |
| Built | Custom build, first one he’s run | Built on site at TAC |
| Result | All five lost or blown up | Didn’t lose one |
Same spine, same point weight, opposite outcome. Which is the point he keeps making — the arrows were never the variable.
20:11“Shoot Paper”: The Advice Everyone Gave Him
Part of what prompted the question was watching Dan shoot. Zakk calls him a master of his craft — he stroked that course, and he clearly puts in the work. When somebody just looks good shooting a bow, you know it: how he holds on target, how the shot breaks, what his release hand does afterward. Dan shot it with a Stan Solex wrist release and crushed it.
The question Zakk put to James, Cooper, and George was direct: he considers himself an okay shooter, and he wanted to know what he’d actually need to do to become a proficient, consistent one. Not shoot more targets at distance — he has a 3D range at his house. Something more deliberate than that.
The answer came back the same from everybody. Shoot paper. Specifically indoor target work: a 20-yard three-spot, drilled until he can’t get it wrong. Build a bow specifically for indoors, work the shot process, and get help with it — something he’s never done, having never worked with a coach.
Cooper’s version had a progression built in. Don’t walk straight out to 20. Start at five yards, then move to 10, then 15, then 20 — pyramiding up slowly rather than rushing it, and honing in on every part of what you’re doing at each stage.
He’s genuinely undecided about whether he’ll build the target bow. He’s never been a target guy and it’s never pulled at him. But it’s pulling now, mostly because he doesn’t want the Prime course to happen twice — and partly because a target bow would give him a reason to shoot inside the shop, which he essentially never does.
That leads to the most useful admission in the episode. Zakk is a routine guy. His diet is regimented. His training is regimented. His practice with the bow is not — it’s whenever he can grab it, in between running a shop and long hours. So the change he’s committing to is carving out time and being consistent with it.
On release setup, he also got an education from Pete at Stan on something he’d never thought hard about: how you actually hold a release, and how much finger pressure affects the consistency of it breaking — especially on a hinge. Pete is a two-finger hinge shooter; his point is that the more fingers you use, the harder it is for some people to keep pressure equal enough for the release to go off the same way every time. Two or three fingers is common, and then it has to be set up correctly, which Zakk admits he’s never done. He’s a simple, get-it-working-and-run-it guy, and he wonders now whether that instinct has cost him on the fine-tuning side.
He also had the Stan guys check his release while he was there — their verdict was that it was set up great. And he came away wanting one specific thing: he’d shot the Stan Lynx in aluminum and never liked it, but the brass version felt completely different. The quality, the weight, the way it behaved on the shot trainer all impressed him enough that he expects to pick one up, and expects Extreme Outfitters to start bringing them in.
30:04The RMEF Course, the Timber, and the Light Problem
After lunch, Zakk and the Extreme Outfitters crew shot the Rocky Mountain Elk Foundation course — 15 targets, all elk, and one of his favorites for exactly that reason: full-size elk, third-scale elk, bedded elk, technical shots and long shots mixed together. They closed the course out as the last group, shooting with one of the Total Archery Challenge guys — a young shooter named Kai, who joined them midway and was sighting in a brand new bow right there on the course.
It went much better. He’d built more arrows while he was at the event — nothing custom, pre-fletched, same 300 spine cut down with 50 grains up front and a 100-grain head — and didn’t lose a single one. His crew shot well across the board: Mr. Ed crushed it as always (“he never loses an arrow, he never misses”), Brian stroked the course, and Kevin, who was doing the custom arrow builds in the booth, shot with the kind of form Zakk describes as what he wants to look like when he shoots a bow.
The course was different this year — moved into the timber, which changed everything. Tight windows. Debris you had to figure out how to shoot through. Deep shadow under the canopy and constantly shifting light.
That last part turned into a real gear lesson. Some shooters struggled to see, because their aperture and peep sight were small enough that not enough light was getting in. Zakk’s takeaway is that this is exactly what an event like TAC is for: it puts your hunting rig into real low-light, weird-angle, deep-shadow scenarios and tells you the truth about it. Are your pins bright enough? Is enough light reaching your aperture to see the target when the sun is setting and you’re in a strange spot on a mountain? You find out there, not on opening morning.
His summary of the whole day: he learns something new at every TAC, and this was by far the most eye-opening and most educational one he has shot.
32:08The Part That Actually Makes the Event
Ask Zakk what his favorite thing about Total Archery Challenge is and it isn’t the courses. It’s the community the event has built — the chance to talk to archers from all over the US and Canada and ask them what works for them, how they set their gear up, and where they struggle. Everyone is trying to solve the same puzzle.
“The amount of people that come up and know us and want to talk to us and pick our brain is so humbling.” — Zakk Plocica
He’s emphatic that the crowd TAC draws is just good people, and that it might be one of the best things going for the archery community. If you haven’t shot one, go. It will humble you — it certainly humbled him.
The range of shooters is part of the appeal. Little kids. Husbands and wives. Whole families. The example that stuck with him was a woman shooting a 40-pound bow with a short draw length, who put an arrow into a target at 111 yards on the Sitka course — a shot that took some archery math to figure out where to hold. They’d seen her hit 94 yards on a practice range in Tennessee, too. Brandon Lilly was there shooting a trad bow. All different calibers and capability levels, all getting after it.
35:58Vendor Village: Going Straight to the Source
The other underrated reason to go is that the manufacturers are physically there. Easton had Cody Griffin on the ground and Dylan, one of their engineers, standing next to him. Zakk watched somebody bring them a question they’d gotten from a shop — that Easton arrows aren’t made in the US — and get an answer directly from the engineer: where the carbon is sourced, where it’s manufactured, how it’s manufactured. That’s a very different thing from getting a secondhand answer from someone without the full picture.
He called out the Dialed crew, Scott and Kevin, for the service they run on site: buy a sight from them and they’ll mount it, level it, take you to the practice range, get you dialed in within about four to eight shots, and send you off with a sight tape. Jake at HHA was in the same category — willing to help, no agenda. Mathews, Hoyt, PSE, Bowtech with their rep Jamie, Black Gold, all there and all approachable.
Zakk’s honest framing of it: you see these people online as celebrities or influencers, when what most of them really are is business people who have to make content. Then you meet them in person and they’re down to earth and happy to give you their time.
37:49Picking Your Courses (and How Many Arrows to Bring)
For a first-time shooter, he’s not sure the Prime course is the one to start with — it certainly wasn’t for him. There were a lot of course names at Seven Springs this year, including new ones: a PSE course and a Bearded Butcher course alongside staples like Prime and RMEF. He heard the Nock On course was super technical and super challenging. Sitka is the longest, with some of the most technical shots.
His advice is to research the courses before you sign up and choose based on two things: your physical fitness level, since some courses cover serious ground, and your shooting capability. And remember that you’re never trapped by a stake — if a shot is outside your wheelhouse, you can walk up and take it from a distance you can actually make. Zakk didn’t do that, and says he probably should have.
The terrain variety is the real training value: uphill, downhill, rocky footing, everything changing under you. If you treat the event like an after-action report the way he does — go, evaluate honestly, break down where you struggled, then build a plan to fix it — you’ll come home with something. This was the most in-depth after-action report he’s done, and almost all of it came off one course.
One problem he can’t solve at home: he lives at sea level on the East Coast and has nowhere to practice steep uphill shots. His proposed solution, which he acknowledges would not go over well, was setting a target on his roof and shooting up over it. Short of that, the plan is more time behind the bow, the changes above, shooting paper because paper doesn’t lie, and practicing with intent — focusing on one specific aspect at a time rather than just flinging arrows.
“I will no longer be taking just five arrows. I’ll probably take at least eight to get through a course at this point. Overconfidence kills, apparently.” — Zakk Plocica
The Courses at Seven Springs, Side by Side
| Course | Shot it? | What Zakk said about it |
|---|---|---|
| Prime | Yes — Friday a.m. | 25 targets, roughly 4–4.5 hours with nobody ahead of them. Long, technical, tight shots; heavy uphill and downhill; much of it in timber. The hardest TAC course he has personally shot. |
| RMEF | Yes — Friday p.m. | 15 targets, all elk — full-size, third-scale, bedded. In the timber this year, so tight windows, debris and deep shadow. Still a long course. One of his favorites. |
| Sitka | Walked past it | Straight-uphill shots that he described as brutal, long, and among the most technical. Finishes on something like a 111-yard ram up the side of the mountain. |
| Nock On | No — secondhand | Heard from other shooters that it was super technical and super challenging. |
| PSE | No | One of the new course names on the schedule this year. |
| Bearded Butcher | No | The other new course name he noted this year. |
His broader read on the whole event: the courses were tough across the board this year. Lots of debris in front of targets, tight shot windows, very few give-me shots — which is what makes it fun, right up until it pushes you into target panic.
The Bottom Line
The honest version of this episode is that Zakk got his teeth kicked in at his favorite event of the year, on camera, next to two shooters he respects. He lost five arrows he’d built himself, borrowed two to finish, and spent the rest of the weekend asking better shooters what he was doing wrong.
What he came home with is a short, specific list: 80% let-off instead of 85%, a shorter effective draw length, a D-loop adjustment, a three-finger hinge, blank bale work, shoulder mobility, and possibly an indoor target bow and a 20-yard three-spot. One thing at a time, in that order, the way George told him.
“This is another opportunity, another challenge I get to work through, and it’s an opportunity to become a better shooter. So it’s a good thing. It’s all about perspective.” — Zakk Plocica
He was bummed for about a day. Then it turned into the most useful thing that’s happened to his shooting in years — a specific problem to solve instead of a vague ambition to shoot better. If you were at Seven Springs, he wants to hear which course wrecked you, so he doesn’t feel like the only one.
Gear & Brands Mentioned
From This Episode
- Easton 5.0, 300 spine
- Easton FMJ
- Easton Axis 5mm
- Easton Max Stealth factory vanes
- TAC Driver 2.25 vanes
- Stan Solex (Dan Staton’s wrist release)
- Stan Lynx — aluminum and brass
- TRU Ball HBC Flex hinge
- TRU Ball releases
- Shot trainer
- Dialed, HHA, Mathews, Hoyt, PSE, Bowtech, Black Gold
Links
Total Archery Challenge: totalarcherychallenge.com
Extreme Outfitters: extremeoutfitters.com (code ARCHERYPROJECT for 10% off)
Instagram: @thearcheryproject
TikTok: @thearcheryproject
YouTube Clips: youtube.com/@thearcheryproject
YouTube Full Episodes: youtube.com/@thearcheryprojectpodcast
Enjoyed this episode? Leave a review — it’s the single biggest thing that helps new listeners find the show.
Rate on Apple Podcasts